Washable cloth nappy insert increases the absorbency by approx 100 ml. It is made of high-quality cotton terry manufactured in the Czech Republic.
90% cotton, 10% polyester
Tested to be suitable for children from the age of 0 at the State Health Institute.
Weight of terry 350g/m2 is considered ideal concerning absorbency and fast drying speed .
Silky and soft feel
It depends on your priorities i.e. if you want to use the insert with every single change, for the night time only or when travelling.
The ideal ratio is to purchase half the number of inserts to the number of the actual nappies.
It is necessary to wash the insert before the first use.
The fibre has been waxed at the production so the maximum absorbency can be achieved only after several washings, terry cloth requires at least 5 washing cycles.
Wash at 60°C.
No need to iron.
Rinse twice to remove the washing detergent properly.
Add 2-3 spoons of vinegar into the second rinsing cycle to soften the water as well as to prevent skin sores (basic environment seems more likely to cause skin rash or sores).
Do not use fabric softeners as they reduce material absorbency and may cause an allergic reaction
It may shrink by 5%.
It is absolutely vital to remove all wax by washing the nappy (see Washing and drying) otherwise the urine may not get absorbed and only run into the wrap thus dampening it.
|Material||Terry 90% cotton 10% PES|